5 1/2" Yellow Trubo
5 1/2″ Yellow Turbo is used to squeege the tint on the inside of the windows. we recommend using this for all of the larger windows. The 2″ Yellow Turbo can be used on the smaller windows.
The EZ reach is used for getting behind the seals. This can scratch the tint very easily, so only use on areas of the tint that are not visible
Non Scratch Pad
None Scratch Scotch Pads are used to thoroughly clean windows–use with soapy water mixture.
The spray bottle is used to spray your soapy water on the window and tint. We recommend using around a tablespoon of baby shampoo in one full bottle of water.
Single Edge Razor Blade
Single Edge Razor Blade used to Clean the side windows and remove any glue or residue. Spray windows with soapy water before using razor blades to avoid scratching them.
The Olfa Knife is used to cut the break light out on the back window. If you don’t need or want to cut out the break light, it is unlikely would will need the Olfa Knife.
The Hard Card is used to shrink the tint on the outside of window. Only use on surface with clear removable liner.
The Heat Gun is used to shrink the window tint on the outside of the window and heat the window up when eliminating fingers in the tint after installation.
The Side Swipe is used to squeegee the bottom of the back window.
2" Yellow Turbo
2″ yellow turbo is used to squeege the tint on the inside of the windows. we recommend using this for all windows too small to use the 5 1/2″ yellow turbo.